Emuca Vertex 3D outdoor drawer 60kg, height 242mm, depth 500mm, Steel, Anthracite Gray
- Hardware kit necessary for the assembly of a metal double-walled exterior drawer. For kitchen, bathroom or wardrobe furniture with a lateral height of the rib of 242 mm.
- It has a 3D adjustment of the front: vertical by means of an eccentric of ±2 mm, horizontal ±1 mm, inclination -1, 5/+4mm. Includes synchronized total extraction guides, with soft closing and load capacity of 60 kg.
- Valid for mounting in modules with a depth of 500 mm. Sized for a board thickness of 16 mm for the bottom and back of the drawer.
- Includes: two side ribs, a set of guides with soft closing, a set of decorative covers and the fixings for the front of the drawer.
- Made of steel and painted anthracite gray.
- Certificación
Kit for Vertex drawer with 3D regulation with all the necessary elements for assembly. It is the optimal solution for your kitchen furniture, with an elegant design, which requires a large load capacity and large interior volume capacity. They allow to regulate the front of the drawer ±2mm vertically, ±1mm horizontally and inclination -1.5/+4mm.
Each kit consists of all the elements necessary for the assembly of a 242 mm high drawer, sized for a board thickness of 16 mm for the bottom and back of the drawer. Includes: two side ribs, a set of soft-close guides, a set of trim covers and the fixings for the drawer front. The guides are synchronized total extraction with soft closing, allowing a maximum load of 60 kg.
The metal side ribs are made of steel with a painted finish in anthracite gray, gray or white.
- High
- 6
- Width
- 34
- Color
- Gris antracita
- EAN
- 8432393308838
- Manufacturer
- EMUCA
- Material
- Steel
- Weight (kg)
- 5
37 - Depth
- 53
- Reference
- EMUCA 3179435
- Certification
- CE