Emuca Vertex exterior drawer with 3D height regulation 131mm, 40kg, depth 300mm, Steel, Painted white
- Hardware kit necessary for the assembly of a drawer with a height of 131 mm and a depth of 300 mm, except for the border, back and bottom.
- Dimensioned for a board thickness of 16 mm for the bottom and back of the drawer.
- Synchronized total extraction guides, with cushioned closure and load capacity of 40 kg.
- It has a 3D adjustment of the front: vertical by eccentric ±2 mm, horizontal ±1 mm, inclination -1.5/+4 mm.
- Made of white painted steel.
Vertex kitchen and bathroom drawer kit with all the necessary elements for assembly. It is the optimal solution for your kitchen, bathroom or closet furniture with an elegant design in anthracite gray and white. Each kit consists of all the elements necessary to assemble a drawer with a height of 131 mm, sized for a board thickness of 16 mm for the bottom and back of the drawer. Includes: two side ribs , a set of guides with soft closing, a set of trim covers and the fixings for the front of the drawer.
The metal side ribs are made of steel with grey, anthracite gray and white painted finish , allow you to adjust the front of the drawer ±2mm vertically and ±1mm horizontally. The guides are total extraction with soft closing and allow a maximum load of 40 Kg for the drawer.
You will only need the boards cut to the correct dimensions for the bottom, the back and border of the drawer.
- High
- 6
- Width
- 20
- Color
- Pintado blanco
- EAN
- 8432393322315
- Manufacturer
- EMUCA
- Material
- Steel
- Weight (kg)
- 2
6 - Depth
- 33
- Reference
- EMUCA 3187712