Super fast liquid glue for quick and precise repairs
Uhu super fast shot 2g ref. 6314564. the super fast liquid glue for ultra fast and precise repairs. extremely strong glue that comes in a container that never loses its shape. resistant to water and dishwasher.
Subscribe To When In Stock
You have successfully subscribed to this product
CHARACTERISTICS
- Super fast and extremely strong glue.
- Compact and convenient packaging
- Precise application, without dripping.
- Water and dishwasher resistant .
- Security wrapper.
APPLICATION
SUITABLE FOR:
Ideal for small joints. Bonds almost all solid and flexible materials, such as many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), leather, porcelain, ceramics , metal, wood, cork , felt, fabric (do a test first), and rubber. Partly suitable for glass (over a certain period of time the bond becomes brittle and weakens).
NOT SUITABLE FOR:
Not suitable for PE, PP, silicone resins and rubbers, PTFE, Styrofoam, leather fabrics and clothing.
TREATMENT
BEFORE USE:
Application circumstances
Do not use at temperatures below + 10 ° C. The glue responds best to a level of air humidity 50-70%.
Surface requirements
The surfaces to be glued must be clean, dry and free of dust and grease, and must fit perfectly.
Pre-treatment of surfaces
All traces of dust, oil, grease, wax or separating agent must be thoroughly removed from the surfaces to be to hit The best way to achieve this is to rub the parts several times with suitable solvents such as acetone (if suitable for the material - check first!). For metals and metal alloys, roughing the surface with sandpaper or grinding or brushing is usually sufficient.
DURING USE:
Instructions for use
1. To pierce the membrane, turn the entire cap clockwise to place it on the container. Do not press while drilling. 2. Unscrew the top cap to reveal the applicator. 3. Apply a thin layer of adhesive on one of the parts, exerting enough pressure in the center of the body of the container (an excess of glue slows down the curing process considerably). Press the pieces together immediately. After use: Clean the mouthpiece with a dry tissue and replace the cap.
Tips
When sticking in low humidity, the drying time can be shortened by breathing briefly on one of the pieces to be glued. The best bonding results are achieved at room temperature.
Points of attention
Contains cyanoacrylate. Bonds skin and eyelids in seconds. If the product comes into contact with the eyes, rinse immediately with plenty of water and see a doctor. In case of skin contact, the glue can be dissolved by soaking in warm soapy water. Next, apply a skin cream. May cause respiratory irritation. Avoid breathing vapors. Keep out of reach of children.
AFTER USE:
Stains/residues
Clean immediately remove excess glue with a dry cloth. After drying, the glue residue is very difficult to remove. Acetone dissolves glue, but very slowly (check its suitability first).
Storage conditions
Store in a dry, cool, frost-free place. Storage below +5°C (in the refrigerator) ensures maximum shelf life.
- EAN
- 8710439284729
- Manufacturer
- UHU
- Trademark
- UHU
- Country of origin
- Spain
- Weight (kg)
- 0
012 - Reference
- EDM 95714
You might also like