Your cart
There are no more items in your cart
The main function of the DELTA LS levelling system from Rubí is to avoid the creation of gaps during the installation of ceramic tiles, both on floors and walls. The DELTA LS levelling system also prevents the movement of the tiles during the setting of the adhesive and, during installation, the number of corrections in the position of the ceramic tile itself is reduced. The basic principle of the DELTA LS levelling system is to press the highest piece, until its position is equal to that of the adjacent tiles, thus obtaining a substantial improvement in surface flatness. The DELTA LS levelling system from Rubí is a system of wedges and flanges, recommended for formats of 30×30 cm or larger and varied thicknesses of up to 12, 15 or 20 mm, depending on the flange model used. Using the DELTA LS levelling system from Rubí is quick, easy and intuitive. Once the installation is complete, the elements of the system are removed by impact (kick or sledgehammer), always hitting the flanges in the direction of the joint. The DELTA LS levelling system wedges can be reused several times. The DELTA LEVEL SYSTEM pliers from Rubí are designed to be used for both horizontal (flooring) and vertical (covering) ceramic tile installation work. The main function of the DELTA LS levelling system pliers from Rubí is to apply the necessary pressure to the wedge to allow the ceramic tile to be levelled, thus obtaining a homogeneous resulting flatness.
