The MEMOKEY RESISTANT KIT, for autonomous anti-vandal access control by keyboard and proximity, allows the management of up to 600 users.
Includes an IP66/IK9 keypad with integrated controller with a narrow profile and reduced dimensions (ref.5293), 3 proximity cards (ref.52750), 2 key fobs (ref.52740) and a 12Vac/1A power supply ( ref.4802).
It has:
• Relay output 2A configurable from 1-99sg (5sg by default) or in bistable (when presenting the card the relay is activated and when present it, it is deactivated).
• Door open sensor input.
• Exit push-button input.
• Alarm- output (negative output that allows activating a relay ref.2013).
This keyboard allows up to 4 different types of access:
• Card only.
• Card + PIN.
• Card or PIN (by default).
• Multi-card , PIN. Presenting 2 to 9 valid cards or pins will open the door.
The access code is entered by dialing 4 to 6 digits + #.
Access Multi-card/PIN type, requires multiple identifiers. For example, if it is programmed with 3 identifiers, in order to operate the door, the user will present their valid card and until the two additional cards have passed (example of the guards), the door will not open.
Each user is associated with an identifier number called ID (from 1 to 600).
Users with ID (from 1 to 598) are standard users, who by presenting a valid card or code will open the door .
Users with IDs (599 and 600) are panic users. These users, upon presenting their valid card or code, open the door and simultaneously activate the Alarm- auxiliary output for 1 minute or until a valid card or PIN is presented.
The keypad has an input of door sensor (can be activated or deactivated). If activated and the door is opened without prior authorization, the alarm will sound until a valid identifier is presented and the door is closed. It will also activate the alarm, if the door remains open for more than 1 minute, after valid access.
The keypad is supplied with two master cards that allow you to register or cancel cards or key fobs, no codes. The codes are registered through the keyboard itself.
The kit can be expanded with a second keyboard (ref.5293) or with a proximity reader WG26 (ref.5296), adding a source additional 12Vdc (ref.4813):
• The keypad can function as INTERLOCK (opening one door with automatic locking of another).
• The reader (ref.5296) will act on the same door.
ACCESSORIES
Ref. 1076 MAGNETIC CONTACT. Door Sensor.
Ref. 5296 RESISTANT PROXIMITY READER
Ref. 5293 KEYBOARD W/PROX RESISTANT
Ref. 5287 RECESSED PUSHBUTTON
Ref. 5288 SURFACE BUTTON
Ref. 4813 POWER SUPPLY 12Vcc/2A
Ref. 67501 UNIV LOCK RELEASE. 990N-P22 10-24V MAX
(Normal operation short armature lock with adjustable latch)
Ref. 4813 POWER SUPPLY 12Vdc/2A
MECHANICAL CHARACTERISTICS
APPEARANCE
Steel.
Surface fixing system.
Hidden screws.
IP66/IK 09
DIMENSIONS
Surface mounting (55 (H) x 147 (V ) x 20 (P) mm.
TECHNICAL CHARACTERISTICS
Power supply: 12Vca
Operating temperature: [-20ºC, + 60ºC ]
Humidity: [10%, 90%]
Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/key fobs.
Configurable in proximity protocol Wiegand 26 and 8 bits burst keyboard format.
Relay (autonomous) 2A (C, No, Nc)
Radiated RF power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.
TECHNICAL SPECIFICATIONS
AUTONOMOUS WIRING
~ (Red): Positive power supply 12 ~ 28Vac/dc
~ - ( Gray & amp; black): Negative power supply 12 ~ 28Vac/dc
C (White & amp; black), NO (Blue), NC (See of & amp; black): Potential free relay. C_common, NO_Normally open, NC_Normally closed.
GND (Black), SP (Brown): door sensor
GND (Black), BS (Yellow): hall exit button
Alarm- ( Gray), ~ (Red): alarm output <200mA
Weight: 1,2001 kg
Measures of the packed product: 7,5x23x17,8 cm
EAN 13: 8424299052380
