DESCRIPTION
The RESISTANT PROXIMITY KIT includes an anti-vandal proximity reader, with a narrow profile and reduced dimensions, allowing its installation in profile doors narrow.
It allows managing up to 1,000 users thanks to the MINI autonomous external controller (ref.5276). This controller includes two MASTERS cards (HIGH/LOW) and an IR infrared keyboard for programming cards and parameters, 3 proximity cards (ref. 52750), 2 key fobs (ref. 52740) and a 12Vac/1A power supply (ref.4802).
MINI controller:
• 2A relay output. By default it supplies 12Vdc between terminals GND, NO. By changing some internal jumpers it becomes dry contact. Configurable from 1-99 sec. (5s by default) or bistable (when the card is presented, the relay is activated and when it is presented again, it is deactivated).
• Exit push-button input. GND, OPEN.
The controller allows up to 2 different types of access when installing a proximity reader.
• Card only
• Multi-card. By presenting 2 to 9 valid cards, the door will open.
Multi-card access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to operate the door, the user will present their valid card and until the two additional cards have passed (example of the guards), the door will not open.
Each user is associated with an identifier number called ID (from 1 to 999). This ID allows you to cancel a lost or stolen card, so it is important to make a list, assigning each user the corresponding ID.
The controller is supplied with two master cards that allow you to register or download cards or key rings.
This kit can be extended with a second proximity reader (ref.5296) that will act on the same relay as the kit.
ACCESSORIES
Ref. 1076 MAGNETIC CONTACT. Door Sensor ..
Ref. 5296 RESISTANT PROXIMITY READER.
Ref. 5287 RECESSED PUSHBUTTON
Ref. 5288 SURFACE BUTTON
Ref. 67501 UNIV LOCK RELEASE. 990N-P22 10-24V MAX
(Normal operation short armature lock with adjustable latch)
Ref. 4802 POWER SUPPLY 12Vca/1A
TECHNICAL SPECIFICATIONS
MECHANICAL CHARACTERISTICS
APPEARANCE
Steel < br/> Surface fixing system.
Hidden screws.
IP66/IK9
DIMENSIONS
Surface mounting (48 (H) x 103 (V) x 20 (P) mm.
TECHNICAL CHARACTERISTICS
Power supply:
Autonomous 12 Vdc (9-24Vdc)
Standby consumption:
12Vdc/25mA
Operating temperature: [-20ºC, + 60ºC]
Humidity: [10%, 95%]
Compatibility: EM cards/keyrings (125KHz), MIFARE (13 , 56MHz) and HID (ISOProxII, 125KHz)
Wiegand 26 proximity protocol.
Radiated RF power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.
TECHNICAL SPECIFICATIONS
AUTONOMOUS WIRING (with external controller ref. 5276)
+ DC (Red): Positive 12Vdc power supply
GND (Black): Negative 12Vdc power supply
D0 (Green), D1 (White): Wiegand 26 connection. LED (Brown): LED control
BZ (Yellow): Acoustic signal.
Weight: 0.9378 kg
Measures of the packed product: 7,5x23x17,8 cm
EAN 13: 8424299052373
