* Reader that allows the door to be opened when a proximity card or key ring is brought closer. Only authorized cards or key fobs will activate the device. No physical contact is necessary.
* Proximity reader that by means of a dipswitches configuration (SW2) that it incorporates can work in an autonomous or centralized system.
Configuration as AUTONOMOUS.
* Capacity for up to 400 user cards or key fobs.
* Reader and controller integrated in the same module.
Configuration as CENTRALIZED MDS-AC Plus.
* Proximity reader with capacity for up to:
- 1020 user cards/key rings with the MDS central unit (ref. 2405).
- 2048 user cards/key rings with the AC Plus central unit (ref. 4410).
* Reader and controller integrated in the same module.
Configuration as CENTRALIZED with Wiegand 26 or Data/Clock protocol.
* When starting the reader if it is in mode:
- Wiegand-26, the «+» LED will light for 1 second.
- Data/Clock, the «-» LED will light for 1 second.
* Proximity reader with capacity up to :
- 1020 card User etas/key fobs with the MDS central unit (ref. 2405).
- 2048 user cards/key fobs with the AC Plus central unit (ref. 4410).
* Requires a door controller (ref. 4420) for connection and operation.
* Acoustic and visual confirmation by means of signaling LEDs of the acceptance or rejection of the presented card.
* Access control module, to be incorporated into SKYLINE and CITYLINE door entry/video door entry panels.
* Recommended for indoors and outdoors.
Technical Characteristics AUTONOMOUS:
- No requires physical contact reader-card. Reading distance of 5 cm (card) or 1.5 cm (key ring).
- Acoustic and visual information on actions.
- Very simple manual or PC programming (card registration).
- Door sensor control and exit button
- Relay output.
- Relay lock release activation with programmable time. Programmable 1 to 99 sec.
- Signaling LEDs (helps programming and status).
Autonomous Programming
- It can be done in 3 ways:
• By Master Card.
• Private programming keyboard.
• PC Software.
Technical Characteristics CENTRALIZED MDS-AC Plus:
- Does not require physical contact card reader. Reading distance at 5 cm (card) or 1.5 cm (key ring).
- Acoustic and visual information on actions.
- Door release button input, door sensor input and door release relay ( C, NO, NC, potential free).
- Reader wiring - Central Unit: 2 wires (power supply) + shielded twisted pair (data). In an installation with several readers, they can be connected in cascade.
- It has a dipswitch (SW1) to configure:
• Door number (switches 1..5): the access/door number ( 0..31).
• Switch 6: No function.
• Door release opening (switches 7..8): depending on the installation:
- Door release opening time (sec.) In MDS.
- In AC Plus software configuration (switches without function).
- CN3 connector: Keypad connector.
- The lock release can be connected directly to the reader and for maximum security installations use the relay decoder ..
Centralized Programming
The programming is done from the PC software corresponding to the installed central unit (ref. 2405 or ref. 4410).
Technical Characteristics CENTRALIZED with Wiegand 26 or Data/Clock protocol:
- Does not require physical contact reader-card. Reading distance at 5 cm (card) or 1.5 cm (key ring).
- Acoustic and visual information on actions.
- Wiegand (WG) or Data/Clock readers allow the installation to be equipped greater anti-sabotage security by not connecting the door opening mechanism or the exit button connection to the reader. All devices are plugged into the door controller and thus are out of range of tampering. The door controller will be installed indoors (safe area) and the reader outdoors.
- The reader can be used with other door controllers that use Wiegand 26 (WG) or Data/Clock protocols.
- Wiring: 7 wires to the door controller.
- For more information, see Technical Characteristics of the door controller.
Centralized Programming
The Programming is done from the PC software corresponding to the installed central unit (ref. 2405 or ref. 4410).
Specifications
Dimensions V ( HxV mm): 105.2 x 47.5
Environmental protection (IP): 54
Shock protection (IK): 07
Power supply (V):
Stand-alone: 12V ( ac/dc).
Centralized: 12Vdc
Consumption (mA) without lock release: 90
Operating temperature: -15 to 55ºC
Weight: 0.227932 kg
Measures of the packed product: 13.5x10x6 cm
EAN 13: 8424299074405
English 
Español
Français
Italiano
Deutsch
Português
