Door opener universal 990AD MAX-L22 (ARM. LONG L22 AND PEST. UNLOCK.)
Manufacturer: FERMAX
Recessed.
The electric opener recessed luminaire is a device that is installed in the door frame to control its opening from a remote location through an electrical device. In an installation of entryphone it is possible to activate the electric lock of the entrance to the building and allow access to the visit from your phone or monitor from the housing by pressing the button key door openers. A door opener flush mount is composed of an electrical mechanism and an armature.
Reversible (DIN Right or DIN Left).
Allows for opening both the right-and left-handed.
Symmetric.
Allows you to change the hand while maintaining the symmetry of the body.
ACCORDANCE WITH DIN REGULATIONS
The NORMATIVE DIN establishes the sense of opening of the door and called the type of door opener installed.
Looking at the door from the side on which the hinges are visible:
-If the hinges are to the left of the observer, it is a door opener to DIN Left.
-If the hinges are to the right of the observer, it is an electric lock DIN-Right.
There are several types of mechanisms for door openers, it depends on the TYPE OF OPERATION that is needed.
TYPE A_AUTOMÁTICO MULTIVOLTAGE 12-24Vac/dc:
• A (Automatic Operation and activation to 10-24Vac/dc): the electric lock is automatically unlocked when receiving a pulse voltage of 10-24Vac/dc. The opener will re-lock once it stops being tension and mechanically opens and again closes the door. For a correct installation the teton machine must be pressed in about 3mm for the floor protector to the door once it is closed.
D UNLOCK
The opener includes a lever for manual release, which inhibits its operation, allowing free access.
MAX LATCH ADJUSTABLE:
The opener includes a latch adjustable, allowing a precise adjustment between the latch and the slip of the lock, with a margin of 4mm. Allows the door leaf do not press on the latch of the door opener.
Armor of recessed Type L22.
For doors with input of lock.
Bezel metal type L22 attached to an electrical mechanism to form an electric lock recessed. Recommended for aluminium profiles and PVC small size to have a width smaller than that of the standard.
Dimensions: 22(H)x250(V)mm
Consumption: A_MULTIVOLTAJE 10-24V: 12Vac:250mA, 12Vdc:280mA 24Vac: 500mA, 24Vdc:560mA
Dimensions: 66(V) x 16(H) x 25.5(P)mm.
Regulation MAX: 2mm
Retention force 330Kg-f/3230N
Temperature: -15ºC up to +40ºC
Cycles tested: 400.000
Weight: 0,2105 kg
Product dimensions packed: 3,4x25x2,7 cm
EAN 13: 8424299675329
